The Bissell Proheat Pet Turbo is a strong carpet cleaner that’s designed to take away pet hair, dander, and different allergens out of your carpets. It options a big capability tank, a strong suction motor, and a wide range of attachments that make it simple to wash all forms of carpets. On this article, we are going to offer you a step-by-step information on the way to use the Bissell Proheat Pet Turbo.
Earlier than you start utilizing the Bissell Proheat Pet Turbo, it is very important assemble the machine and put together the cleansing answer. To assemble the machine, merely connect the deal with to the bottom after which insert the tank into the bottom. To arrange the cleansing answer, combine 1 gallon of sizzling water with 4 ounces of Bissell Proheat Pet Turbo cleansing answer. As soon as the machine is assembled and the cleansing answer is ready, you’re prepared to start cleansing your carpets.
To scrub your carpets, merely fill the tank with the cleansing answer after which choose the specified cleansing mode. The Bissell Proheat Pet Turbo provides three cleansing modes: Categorical Clear, Deep Clear, and Rinse Solely. The Categorical Clear mode is designed for fast and simple cleansing, whereas the Deep Clear mode is designed for deep cleansing of closely dirty carpets. The Rinse Solely mode is used to rinse your carpets after deep cleansing. After getting chosen the specified cleansing mode, merely press the set off on the deal with to start out cleansing. The Bissell Proheat Pet Turbo will robotically dispense the cleansing answer and water onto the carpet, after which it should use its highly effective suction motor to take away the filth and particles. As you clear, make sure you overlap your strokes to make sure that all areas of the carpet are cleaned evenly.
Assembling the Bissell Proheat Pet Turbo
Unboxing the Bissell Proheat Pet Turbo
After getting unpacked the Bissell Proheat Pet Turbo from its field, you will see the next elements:
– The machine base
– The deal with meeting
– The water tank
– The detergent tank
– The cleansing head
– The pet hair device
Earlier than you start assembling the Bissell Proheat Pet Turbo, make it possible for the entire elements are current and that none of them are broken. If any of the elements are lacking or broken, don’t use the machine and get in touch with Bissell customer support.
To assemble the Bissell Proheat Pet Turbo, comply with these steps:
1. Connect the deal with meeting to the machine base. To do that, align the deal with meeting with the machine base and push it down till it clicks into place.
2. Insert the water tank into the machine base. To do that, carry the water tank lid and fill the tank with clear, chilly water. Then, insert the water tank into the machine base and push it down till it clicks into place.
3. Insert the detergent tank into the machine base. To do that, carry the detergent tank lid and fill the tank with Bissell Pet Professional Oxy system. Then, insert the detergent tank into the machine base and push it down till it clicks into place.
4. Connect the cleansing head to the deal with meeting. To do that, align the cleansing head with the deal with meeting and push it down till it clicks into place.
5. Connect the pet hair device to the cleansing head. To do that, align the pet hair device with the cleansing head and push it down till it clicks into place.
Filling the Clear Water Tank
To fill the clear water tank in your Bissell Proheat Pet Turbo, comply with these steps:
1. Preparation
Earlier than filling the tank, make sure that the machine is unplugged and the facility twine is disconnected from the outlet. Find the clear water tank on the again of the machine, which is normally marked with a blue or clear lid.
2. Eradicating the Fill Cap
The fill cap is positioned on the highest of the clear water tank. To take away it, twist it counterclockwise till it pops open. Some fashions could have a latch that you might want to launch earlier than twisting.
3. Filling the Tank
Insert the tip of your water hose or a pitcher into the fill opening. Fill the tank with sizzling water (140-160°F/60-71°C) to the “Max” fill line. Don’t overfill the tank.
4. Cleansing Formulation
Add the required quantity of Bissell cleansing system to the water in keeping with the directions on the system bottle. Utilizing an excessive amount of system could cause the machine to foam excessively.
5. Changing the Fill Cap
As soon as the tank is stuffed, screw the fill cap again onto the tank by twisting it clockwise till it’s securely tightened. Be sure that the cap just isn’t free, as this will trigger water to leak throughout operation.
Including the Cleansing Resolution
Observe these detailed steps to successfully add the cleansing answer to your Bissell Proheat Pet Turbo:
1. Fill the Clear Water Tank
Take away the Clear Water Tank from the machine and fill it with clear, sizzling faucet water as much as the “Max” fill line.
2. Measure the Cleansing Resolution
Consult with the cleansing directions offered along with your Bissell cleansing answer. Measure the beneficial quantity of cleansing answer (usually 1-2 ounces) into the small cup offered.
3. Pour the Cleansing Resolution into the Formulation Tank
Take away the Formulation Tank from the machine. Find the opening on the highest and pour the measured cleansing answer into the tank. Exchange the Formulation Tank.
Extra Ideas:
- Use the cleansing answer particularly formulated for Bissell Proheat Pet Turbo.
- Don’t use vinegar or different cleansing brokers as they could harm the machine.
- By no means exceed the beneficial quantity of cleansing answer, as it might probably trigger extreme foaming.
- Use a spoon or scoop to keep away from pouring an excessive amount of answer into the Formulation Tank.
- Hold the cleansing answer out of attain of kids and pets.
After getting added the cleansing answer, you’ll be able to proceed to the following step of cleansing your carpets or different surfaces.
| Step | Motion |
|---|---|
| 1 | Take away the Clear Water Tank. |
| 2 | Fill the tank with clear, sizzling faucet water. |
| 3 | Measure and add the cleansing answer to the Formulation Tank. |
| 4 | Exchange the Formulation Tank. |
Selecting the Right Cleansing Mode
The Bissell Proheat Pet Turbo provides three cleansing modes to accommodate various kinds of messes and surfaces.
Categorical Clear Mode
This mode is right for fast cleanups or touch-ups. It makes use of much less water and detergent, making it much less more likely to saturate carpets or go away a residue.
Deep Clear Mode
This mode offers a complete clear, utilizing extra water and detergent. It successfully removes filth, dander, and odors, leaving your carpets feeling refreshed and rejuvenated.
Rinse Solely Mode
This mode lets you rinse your carpets with out making use of any detergent. It is useful for eradicating residual detergent or pet urine stains.
| Cleansing Mode | Advisable Use | Water and Detergent Utilization |
|---|---|---|
| Categorical Clear Mode | Fast cleanups, touch-ups | Much less water and detergent |
| Deep Clear Mode | Complete clear | Extra water and detergent |
| Rinse Solely Mode | Eradicating residual detergent or pet urine stains | No detergent |
Attaching the Cleansing Instruments
Attaching the cleansing instruments is crucial for getting probably the most out of your Bissell Proheat Pet Turbo. This is a step-by-step information that will help you do it appropriately:
1. Connect the Carpet Cleansing Device
Align the carpet cleansing device with the bottom of the machine. Slide the device onto the bottom till it snaps into place.
2. Connect the Upholstery Cleansing Device
Insert the upholstery cleansing device into the designated port on the entrance of the machine. Push it in till it locks in place.
3. Connect the Naked Flooring Cleansing Device
Slide the naked ground cleansing device onto the bottom of the machine. Be sure that the device is totally seated and safe.
4. Connect the Crevice Device
Insert the crevice device into the small opening on the entrance of the machine. Be sure that it’s securely connected.
5. Attaching the Stair Device (Non-compulsory)
The stair device just isn’t included with all Bissell Proheat Pet Turbo fashions. In case your mannequin comes with it, comply with these steps:
| Step | Description |
|---|---|
| 1. | Join the stair device to the extension wand. |
| 2. | Insert the extension wand into the designated port on the entrance of the machine. |
| 3. | Be sure that all connections are safe. |
Working the Bissell Proheat Pet Turbo
Utilizing the Bissell Proheat Pet Turbo is designed to be user-friendly, here is a step-by-step information that will help you get began:
1. Fill the Clear Water Tank
Take away the clear water tank and fill it with sizzling faucet water to the designated line. Don’t use boiling water.
2. Add Cleansing Resolution
Pour the beneficial quantity of Bissell Pet Professional Oxy cleansing answer into the tank.
3. Connect the Upholstery Device (Non-compulsory)
For those who’re cleansing furnishings, connect the upholstery device to the tip of the hose.
4. Choose the Floor Setting
Select the suitable floor setting for the realm you are cleansing: Laborious Flooring, Carpet, or Upholstery.
5. Activate the Machine
Plug within the machine and press the facility button to start out it up.
6. Cleansing with the Proheat Pet Turbo
Slowly transfer the machine forwards and backwards over the floor you are cleansing. The machine will robotically dispense the cleansing answer and extract the filth. Repeat the method till the floor is clear and dry to the contact.
| Floor | Cleansing Technique |
|---|---|
| Laborious Flooring | Use the Laborious Flooring brush head and make “S” motions throughout the floor. |
| Carpet | Use the Carpet brush head and make sluggish, overlapping passes over the realm. |
| Upholstery | Connect the Upholstery device and use sluggish, light strokes on the material. Keep away from over-saturating. |
Cleansing the Pet Turbo Brush Roll
The Pet Turbo Brush Roll is an non-obligatory attachment for the Bissell Proheat Pet Turbo, designed particularly for eradicating pet hair and particles from carpets and fabric. To make sure optimum efficiency, it is essential to wash the comb roll commonly.
Observe these steps to wash the Pet Turbo Brush Roll:
1. Unclip the Brush Roll
Find the 2 latches on the aspect of the vacuum cleaner. Press the latches concurrently to launch the comb roll.
2. Take away the Brush Roll
Pull the comb roll straight out of the cleaner.
3. Examine the Brush Roll
Look at the comb roll for any seen particles, akin to pet hair, filth, or carpet fibers.
4. Take away Particles by Hand
Use your fingers or a pair of scissors to take away any free particles from the comb roll.
5. Rinse the Brush Roll
Maintain the comb roll below heat operating water, utilizing your fingers to softly take away any remaining particles.
6. Use a Cleansing Resolution
If essential, apply a small quantity of light dish cleaning soap or upholstery cleaner to a humid material and wipe down the comb roll.
7. Rinse and Dry the Brush Roll Completely
Completely rinse the comb roll with clear water to take away any residual cleansing answer. Enable it to air dry utterly earlier than reinstalling it.
| Cleansing Frequency | Advisable Utilization |
|---|---|
| Day by day | For households with pets that shed closely |
| Weekly | For households with average pet shedding |
| Month-to-month | For households with minimal pet shedding |
Emptying the Soiled Water Tank
After cleansing, it is essential to empty the soiled water tank to stop odors and keep the vacuum’s optimum efficiency.
-
Unplug the Bissell Proheat Pet Turbo from the facility outlet.
-
Find the soiled water tank, usually located on the entrance or again of the machine.
-
Firmly grasp the tank’s deal with and pull it straight as much as detach it from the vacuum.
-
Carry the tank to a sink or designated disposal space.
-
Take away the rubber stopper from the underside of the tank.
-
Pour the soiled water into the sink or disposal system.
-
Use clear water to rinse the tank completely.
-
Reinstall the rubber stopper firmly into the underside of the tank.
-
Reattach the soiled water tank to the vacuum by aligning it with the designated slot and pushing it down till it clicks into place.
Cleansing the Drain Nozzle
The drain nozzle is positioned on the underside of the machine. It is very important clear the drain nozzle commonly to stop clogs. To scrub the drain nozzle, comply with these steps:
1. Unplug the machine from {the electrical} outlet.
2. Take away the water tank from the machine.
3. Flip the machine the wrong way up.
4. Find the drain nozzle.
5. Use a small brush or a toothpick to take away any particles from the drain nozzle.
6. Rinse the drain nozzle with clear water.
7. Reattach the water tank to the machine.
8. Plug the machine again into {the electrical} outlet.
9. To scrub the drain nozzle completely, you need to use a mix of sizzling water and white vinegar. Pour the combination into the drain nozzle and let it sit for 10 minutes. Then, use a small brush or a toothpick to take away any remaining particles. Rinse the drain nozzle with clear water.Troubleshooting Widespread Points
1. My Bissell Proheat Pet Turbo just isn’t working
In case your Bissell Proheat Pet Turbo just isn’t working, there are some things you’ll be able to test.
- **Is the facility twine plugged in?** Be sure that the facility twine is securely plugged into an outlet and that the outlet is working.
- **Is the water tank empty?** If the water tank is empty, the machine will be unable to supply steam.
- **Are the filters soiled?** If the filters are soiled, they’ll limit the airflow and forestall the machine from working correctly.
- **Is the comb roll jammed?** If the comb roll is jammed, it might probably forestall the machine from transferring ahead.
- **Is the belt damaged?** If the belt is damaged, the machine will be unable to rotate the comb roll.
2. My Bissell Proheat Pet Turbo is leaking water
In case your Bissell Proheat Pet Turbo is leaking water, there are some things you’ll be able to test.
- **Is the water tank overfilled?** If the water tank is overfilled, water can leak out of the highest of the machine.
- **Is the water tank lid not correctly sealed?** If the water tank lid just isn’t correctly sealed, water can leak out of the edges of the machine.
- **Is the hose cracked or broken?** If the hose is cracked or broken, water can leak out of the hose.
- **Is the pump leaking water?** If the pump is leaking water, it should should be changed.
3. My Bissell Proheat Pet Turbo just isn’t vibrating
In case your Bissell Proheat Pet Turbo just isn’t vibrating, there are some things you’ll be able to test.
- **Is the vibration mode turned on?** Be sure that the vibration mode is turned on within the management panel.
- **Is the comb roll vibrating?** Test to see if the comb roll is vibrating. If it’s not, the motor could should be changed.
- **Is the belt damaged?** If the belt is damaged, the motor will be unable to rotate the comb roll.
4. My Bissell Proheat Pet Turbo just isn’t suctioning correctly
In case your Bissell Proheat Pet Turbo just isn’t suctioning correctly, there are some things you’ll be able to test.
- **Is the filth tank full?** If the filth tank is full, it might probably limit the airflow and forestall the machine from suctioning correctly.
- **Is the filter soiled?** If the filter is soiled, it might probably limit the airflow and forestall the machine from suctioning correctly.
- **Is the hose clogged?** If the hose is clogged, it might probably limit the airflow and forestall the machine from suctioning correctly.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to generate suction.
5. My Bissell Proheat Pet Turbo just isn’t heating up
In case your Bissell Proheat Pet Turbo just isn’t heating up, there are some things you’ll be able to test.
- **Is the water tank empty?** If the water tank is empty, the machine will be unable to supply steam.
- **Is the heater factor clogged?** If the heater factor is clogged, it will be unable to warmth the water.
- **Is the thermostat faulty?** If the thermostat is flawed, it will be unable to control the temperature of the water.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to generate warmth.
6. My Bissell Proheat Pet Turbo is making a wierd noise
In case your Bissell Proheat Pet Turbo is making a wierd noise, there are some things you’ll be able to test.
- **Is the comb roll hitting one thing?** If the comb roll is hitting one thing, it might probably make a rattling noise.
- **Is the belt free?** If the belt is free, it might probably make a squealing noise.
- **Is the pump not working correctly?** If the pump just isn’t working correctly, it might probably make a buzzing noise.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it might probably make a grinding noise.
7. My Bissell Proheat Pet Turbo just isn’t selecting up filth
In case your Bissell Proheat Pet Turbo just isn’t selecting up filth, there are some things you’ll be able to test.
- **Is the comb roll rotating?** If the comb roll just isn’t rotating, it will be unable to select up filth.
- **Is the suction hose clogged?** If the suction hose is clogged, it will be unable to select up filth.
- **Is the filter soiled?** If the filter is soiled, it might probably limit the airflow and forestall the machine from selecting up filth.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to generate suction.
8. My Bissell Proheat Pet Turbo is leaving streaks on my carpet
In case your Bissell Proheat Pet Turbo is leaving streaks in your carpet, there are some things you’ll be able to test.
- **Is the water tank soiled?** If the water tank is soiled, it might probably go away streaks in your carpet.
- **Is the detergent tank empty?** If the detergent tank is empty, the machine will be unable to dispense detergent, which might go away streaks in your carpet.
- **Is the nozzle clogged?** If the nozzle is clogged, it might probably limit the move of water and detergent, which might go away streaks in your carpet.
- **Is the comb roll soiled?** If the comb roll is soiled, it might probably go away streaks in your carpet.
9. My Bissell Proheat Pet Turbo just isn’t dishing out detergent
In case your Bissell Proheat Pet Turbo just isn’t dishing out detergent, there are some things you’ll be able to test.
- **Is the detergent tank empty?** If the detergent tank is empty, the machine will be unable to dispense detergent.
- **Is the detergent dispenser clogged?** If the detergent dispenser is clogged, the detergent will be unable to move out of the machine.
- **Is the detergent hose clogged?** If the detergent hose is clogged, the detergent will be unable to move out of the machine.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to dispense detergent.
10. My Bissell Proheat Pet Turbo just isn’t turning off
In case your Bissell Proheat Pet Turbo just isn’t turning off, there are some things you’ll be able to test.
Potential Trigger Resolution The facility twine just isn’t plugged in Plug the facility twine into an outlet The facility change just isn’t turned off Flip the facility change to the off place The motor is seized Have the motor changed by a professional technician The circuit breaker has tripped Reset the circuit breaker Bissell Proheat Pet Turbo: A Complete Information to Its Utilization
The Bissell Proheat Pet Turbo is a strong cleansing machine designed to deal with the precise cleansing challenges confronted by pet house owners. Its superior options and progressive design make it a helpful asset for properties with furry companions. This is a step-by-step information on the way to successfully use the Bissell Proheat Pet Turbo:
- Put together the Resolution: Fill the clear water tank with the offered Bissell system. Keep away from utilizing family detergents or different chemical substances, as they’ll harm the machine.
- Connect the Device: Choose the suitable cleansing device on your floor (e.g., brush roll for carpets, upholstery device for furnishings). Safe it to the machine’s nozzle.
- Check in an Inconspicuous Space: Earlier than cleansing a big space, check the answer and cleansing device on an not noticeable spot to make sure compatibility.
- Clear: Slowly transfer the machine over the floor, urgent the set off to launch the cleansing answer. Keep away from over-saturating the realm.
- Rinse: After cleansing, change to the clear water setting and rinse the realm completely. This may extract the soiled water and answer.
- Empty the Soiled Water Tank: As soon as the rinse cycle is full, empty the soiled water tank and refill it with clear water for the following cleansing session.
Individuals Additionally Ask About Bissell Proheat Pet Turbo How To Use
How Do I Resolve a Clogged Nozzzle?
If the nozzle turns into clogged, comply with these steps to unclog it:
- Flip off and unplug the machine.
- Take away the cleansing device from the nozzle.
- Use a paperclip or toothpick to softly take away any particles or hair which may be blocking the nozzle holes.
- Reattach the cleansing device and check the nozzle by urgent the set off.
Can I Use the Bissell Proheat Pet Turbo on Laborious Flooring?
Sure, you need to use the Bissell Proheat Pet Turbo on arduous flooring. Nonetheless, it is advisable to make use of the arduous ground device to keep away from scratching or damaging the floor.
How Typically Ought to I Clear My Bissell Proheat Pet Turbo?
For optimum efficiency, it is beneficial to wash the Bissell Proheat Pet Turbo after every use. This entails emptying the soiled water tank, refilling the clear water tank, and rinsing the machine completely by following the steps outlined above.
